Pure Sine Wave Output
The electrical waveform output of PH1800 is a pure sine wave, which has the same quality as utility and/or domestic power. This type of waveform is suitable for most all electrical devices, appliances and tools. This pure sine wave unit provides more capabilities than modified sine wave inverters, because it is a cleaner form of power. The pure sine wave also effectively reduces the noise produced while using appliances.
you can download this app on your cellphone and monitor the whole system, you will know know how much electricity the system generate and sell to utility.
3-5.5KW Parallel function
Customer can use 2pcs or 3 pcs inverters to expand the system capacity. Maximum 3pcs parallel to single phase or three phase.Parallel kit picture as below:
3-Step (Flooded Battery, AGM/Gel/Lithium Battery),4-Step(LI)
You can connect inverter with PC with communication cable and monitor the inverter woking status and all inverter parameter, you even can set these parameters such as AC voltage, battery voltage, charge current, working mode etc
Easy to read all working modes and parameters in LCD
Note:*Sell mode: The system generates electricity when the sun shines, supplying power to your home and sending any excess power back tothe grid.
Match load state
Note: DC power produced from your solar array is converted by the inverter into AC power, which is then sent to your main electrical panel to be used by your household appliances. Any excess power generated is not sold back to thegrid, but stored in battery.
PV energy and grid can charge batteries.
Error are caused by inside circuit error or external reasons such as over temperature, output short circuited and so on.
The inverter will provide output power from battery and PV power.
PH1800 series intelligent working mode
Grid-Tie with Battery Back-UpGrid tie with backup system is intelligent to run your house, it generates electricity when the sun is shining, and supplies power to your house while selling any excess power back to the utility to reduce your electric bill.However, the PV energy system continues to operate during a grid outage. The batteries provide quiet, uninterrupted back-up power for loads such as refrigerators, lights, pumps, and computers, while your PV array continues to produce power and charge the batteries during the day. When the grid is restored, the inverter/chargers help recharge the batteries to their full state of charge while the grid powers all AC loads. Once the batteries are recharged, the system returns to normal operation.
INVERTER SYSTEM CONNECTION
|MODEL||PH18-2024 Plus||PH18-3024 Plus||PH18-3048 Plus||PH18-4048 Plus||PH18-5048 Plus||PH18-5548 Plus|
|Nominal Battery System Voltage||24VDC||48VDC|
|Waveform||Pure Sine Wave|
|AC Voltage Regulation (Batt.Mode)||220VAC-240VAC(setting)|
|Transfer Time||10ms(For for Personal Computers) 20ms( For Other Home Appliance)|
|Selectable Voltage Range||170~280VAC(For Personal Computers)、90~280VAC(For Home Appliances)、184~253VAC(VDE4105)|
|Frequency Range||50Hz/60Hz (Auto Sensing)|
|Floating Charge Voltage||27.4VDC||54.8VDC|
|SOLAR CHARGER & AC CHARGER|
|Maximum PV Array Open Circuit Voltage||145VDC|
|PV Array MPPT Voltage Range||30∽130VDC||64∽130VDC|
|Standby Power Consumption||2W|
|PV Array MPPT Voltage Range||2000W||4000W|
|Maximum PV Array||80A|
|Maximum AC Charge Current||60A|
|Maximum Charge Current||140A|
|Machine Dimensions (W*H*D)||272*355*100 mm||297.5*468*125 mm|
|Humidity||5% to 95% Relative Humidity (Non-condensing)|
|Operating Temperature||0°C ~55°C|
|Storage Temperature||-15°C ~60°C|
*Products specifications are subject to change without further notice